This function allows you to include one or more fibers in a cable work or remove fibers from the cable work.
Using the "Fibers per cable work report" function you will be able to view a report on the fibers per cable work.
|
Erase the field. |
|
View the cable work in the geography. |
|
Link all fibers within the drawn cable work area (geography). |
|
Unlink all fibers within the drawn cable work area (geography). Ontkoppel alle vezels welke binnen het geografisch ingetekende kabelwerk liggen. |
|
You can make a selection of fibers by entering a location, a duct, a cable, or a combination of those three. Apart from this you may indicate which fiberseries (low, high) you wish to include in the cable work. After this you click the "Include in cable work" button and the number of fibers that will be included in the cable work will be counted. If you agree with this number click "Yes" and the fibers will be included in the cable work. It is possible that no fibers are found. This may occur if no fibers comply with the selection or because those fibers are already included in the cable work indicated or are associated with another cable work. |
|
You may make a selection of fibers by indicating a cable work.All fibers associated with this cable work will be unlinked. You may also enter a location, a duct, a cable, or a combination of these 3. combined with an indication of the fiberseries (from, up to). If you click the "Unlink cable work" button the number of fibers that will be unlinked will be counted. If you agree with this number click "Yes" and the fibers will be actually unlinked. |
|
Annuleer de invoer / wijzigingen en sluit het (bewerk)venster. |
Last edited: 06-10-2017
|
|
© Speer IT B.V. 1999-2018 |
