Through this screen you may add a new point object (access point or enclosure) to the geography and you may change the data concerning an existing point object.
You may call up this screen from the "Change geography" screen.
In the screen you indicate to which cable work the change is related , the date on which the change factually took place, and which installation company performed the change. Standard you will find here the data you used the last time.
Furthermore, you enter the name and the type of the point object. The symbol representing the access point in the geography depends on the type of access point.
You may also determine a unique name of the point object with the 
button. The name will start with the characters entered in the field next to the button.
The x and y coordinates can be changed or entered manually. This makes it possible to place a measured access point in the correct location.
|
When you enter an accesspoint you can add the depth in cm in the field 'depth'. You can also add information whether the accespoint is visible or not. For example, you can add a value of -30 if the top of the accespoint is below ground level. When the accesspoint is 20 cm above ground level you insert a value of 20.
It is possible to capture the precision of the accesspoint. This means that there will be captured how accurate the accesspoint is drawn. With the specified size is in meters the maximum deviation indicated.
Het symbool waarmee het accesspoint wordt weergegeven in de geografie, is afhankelijk van het type accesspoint.
|
|
If the detailstatus of the enclosure is set to 'build in progress' (status=1) then the enclosure is blocked, no changes are allowed. |
|
While entering a handhole and enclosure at the same time it is possible to add a status to the objects. |
Accesspoint
Enclosure
Accesspoint + Enclosure
Jump
On the right of the screen it is possible to check-mark the 'jump' function. With this, the user specifies that a free transfer from a network location owner to another may be made. This is used with automatically routing.
The following actions may be taken from this screen:
|
View report on history accesspoint / enclosure. |
|
Shows a report on usage by customers of all involved cables. |
|
Refresh the map. |
|
A report is generated of all ducts in and near the handhole with the possible relations between cables and slacks (storied cables). When the detailed status of an enclosure is set on "being build" (status=1), the enclosure is blocked for any changes. |
|
Should you wish to place an enclosure, you can only do this in an existing or planned accesspoint. |
Last edited: 01-11-2017
|
|
© Speer IT B.V. 1999-2018 |
