<< Click to Display Table of Contents >> Navigation:  »No topics above this level« Maintain relation Cable/ducts

 

This screen allows you to place cables in (unjustly empty) ducts in a swift manner.The screen is started from the "Change geography" screen.

The condition is that a selection is made, after which the cables will be displayed that comply with the selection. For each cable a number of data is presented among which the minimum and maximum overlap.ap. The overlap is defined as the percentage by which the cable overlaps with the duct. The minimum overlap indicates the percentage of overlap of the cable which has the least overlap with the duct.The maximum overlap indicates the percentage of overlap of the cable which has the most overlap with the duct. See also the figure below:

In this situation there are 2 cables in a duct.The first cable has an overlap of 65% with the duct, the second cable has an overlap of 25%, and the third an overlap of 10%.In the screen, a minimum overlap of 10% and a maximum overlap of 65% will now be indicated for this cable.

You may select one or more cables in various ways. You may search on location name, cable name, ductnumber, zipcode, zipcode/house number, SpanID, or project number. By clicking the button the search action will be started.All cables that comply with the selection will be displayed.

By clicking the button the selected cable in the geographical screen will be displayed.This may also be done by double-clicking on a cable.

If a cable is clicked the duct routes appear in the grid underneath, which have an overlap with the selected cable.In the grid is indicated for each duct route what percentage of overlap the selected cable has with the duct.

From this grid you may double-click on a duct route after which you will be able to change the contents of the duct. If you make changes through this screen, these changes will not be displayed directly in the current screen. For that, you need to execute the search again with the button.

By clicking on a duct route, the grid next to it will display all ducts which are present in this duct route.By subsequently double-clicking on one of the ducts displayed, the selected cable will be placed in the selected duct.

---